®

ProAir-VR

VINSOL RESIN AIR ENTRAINING ADMIXTURE FOR CONCRETE

DESCRIPTION:

ProAir–VR is specially formulated for use as an air entraining admixture for concrete.  ProAir–VR  is manufactured under strict quality control standards to insure uniform performance at the job site. 

ADVANTAGES:

ProAir–VR introduces millions of uniformly sized and spaced air voids throughout the concrete mixture.  Concrete containing these tiny, air bubbles has been proven far more resistant to freezing and thawing than plain concrete.  ProAir-VR  in hardened concrete reduces permeability and enhances the resistance to surface deterioration caused by de-icing chemicals.  Concrete containing ProAir–VR requires less water; therefore, bleeding is reduced.  ProAir–VR aids in finishing and produces a more water tight concrete with a lower water-cement ratio.  The air bubbles act as “Ball- Bearings” to greatly improve the plasticity and workability of the concrete, making it easier to flow into forms or be pumped into place. Concrete mixes designed using ProAir – VR result in a reduction of segregation and honeycombing with smoother and more even finished surfaces.

DOSAGE:

There is no standard addition rate for ProAir-VR.  The amount to be used will vary with local materials and intended concrete performance requirements, usually in the range of 4% to 6%.  Typical

ProAir-VR addition rates range from .5 to 2 ounces per 100 pounds (33 to 130 ml per 100kg) of cement.

SPECIFICATIONS:

Conforms to ASTM C260

AASHTO M 154

CRD C 13

TECHNICAL NOTE:

ProAir–VR does not contain calcium chloride or any chloride based components.  It will not promote or contribute to corrosion of reinforcing steel in concrete.

USES:

ProAir–VR may be used wherever air entrainment is required by concrete specifications.  It is particularly useful in:

*      All commercial and residential concrete

*      Mass concrete

*      High cement, low slump paving mixes

*      Mixes with high carbon content fly ash

*      Concrete using high-alkali cement

*      All concrete to be exposed to freezing

        and thawing conditions

*      Concrete to be mixed for an extended

        period of time

COMPATIBILITY:

ProAir-VR is fully effective and compatible in concrete containing all types of Portland cement, class C and F fly ash, microsilica, calcium chloride, fibers and approved water-reducing, accelerating and retarding admixtures.  ProAir-VR can be used in all white, colored, and architectural concrete.

PRO MIX Technologies warrants its products to be free from defects in material and manufacture.  There are no other warranties by PRO MIX Technologies of any nature whatsoever, expressed or implied.  This information is based on data and knowledge believed to be true and accurate at time of publication and is offered as a resource for the users of our products.  PRO MIX Technologies assumes no liability in the use of this information and does not warranty the results obtained for any application.  PRO MIX Technologies shall not be liable for damages of any sort,  from the use or results of this product and shall not be responsible for conditions outside its control, including but not limited to, other materials, design, inspection, workmanship and field conditions.  No statement, recommendation, or other information is intended to infringe on any patent or copyright held by others.

P.O. Box 6   Allen, Texas  75013   (972) 772-6010   (972) 562-1822 Fax
Copyright 1998   Pro Mix Technologies, L.L.C.