®

Plastimix SFP 40

WATER-REDUCING ADMIXTURE FOR CONCRETE

DESCRIPTION:

Plastimix SFP 40 is a ready to use aqueous solution of complex compounds that enhance the performance of plastic and hardened concrete.  Plastimix SFP 40 is manufactured under rigid quality control measures to provide uniform, reliable results. 

USES:

Plastimix SFP 40 is recommended for mixes where reduced water content, improved cement performance, uniform, normal set times and enhanced finishing characteristics are desirable. 

ADVANTAGES:

·         Improves workability and finishability on all flatwork, slip formed and pre-cast surfaces

·         Improves pumpability of concrete

·         Provides normal-setting characteristics

·    Improves the quality of concrete by decreasing water-cement ratio

·    Increases early and ultimate compressive and flexural strength

·         Reduces cracking and shrinkage 

DOSAGE RATE:

Plastimix SFP 40 is recommended for use at a dosage rate of 2 to 5 fluid ounces per 100 pounds (130 to 325 ml per 100 kg) of cement.  

SPECIFICATIONS:

Conforms to ASTM C 494 type A

AASHTO M 194 Type A

CRD C 87 Type A

TECHNICAL NOTE:

Plastimix SFP 40 does not contain any purposely added calcium chloride or other chloride based components.  It will not promote or contribute to corrosion of reinforcing steel in concrete.

COMPATIBILITY:

Plastimix SFP 40 is compatible with all types of Portland cement, class C and F fly ash, slag, microsilica, calcium chloride, fibers and approved air entraining, accelerating, retarding, and super plasticizing admixtures.  Plastimix SFP 40 can be used in all white, colored, and architectural concrete.  For best results, each admixture must be dispensed separately into the concrete mix.

STORAGE:

Plastimix SFP 40 may freeze at temperatures below 35 F (2 C).  Although freezing does not harm Plastimix SFP 40, precautions should be taken to protect it from freezing.  If it should happen to freeze, thaw and reconstitute with mechanical agitations.  Do Not Use Pressurized Air For Agitation.

PRO MIX Technologies warrants its products to be free from defects in material and manufacture.  There are no other warranties by PRO MIX Technologies of any nature whatsoever, expressed or implied.  This information is based on data and knowledge believed to be true and accurate at time of publication and is offered as a resource for the users of our products.  PRO MIX Technologies assumes no liability in the use of this information and does not warranty the results obtained for any application.  PRO MIX Technologies shall not be liable for damages of any sort,  from the use or results of this product and shall not be responsible for conditions outside its control, including but not limited to, other materials, design, inspection, workmanship and field conditions.  No statement, recommendation, or other information is intended to infringe on any patent or copyright held by others.

P.O. Box 6   Allen, Texas  75013   (972) 772-6010   (972) 562-1822 Fax
Copyright 1998   Pro Mix Technologies, L.L.C.